The LED on your Comfast WiFi extender must not flash a red color. On the off chance, the LEDs on the extender started blinking red, it means something big has happened. But, you don’t have to fret out because you are on the right page.Here, we have provided the reasons causing the issue along with the solutions to get it fixed.
Hence, without waiting much, let’s get the ball rolling!
Reasons: Comfast WiFi Extender Red Light Issue
The reason behind getting red color on the extender can be any of the following.
-
Improper Comfast extender setup
-
Bad location of the extender
-
Connectivity issues between your extender and router
-
Outdated firmware
-
Poor power supply
-
Technical glitches
Now, we are going to provide the fixes through which you can easily troubleshoot the issue while relaxing on your couch. Keep reading!
Fixed:ComfastWiFi ExtenderRed Light Issue
Fix 1: Restart Your ComfastWiFi extender
Sometimesbecause of minor technical glitches, the LED on your WiFi extender can flash in redcolor.
No worries! Kick off the glitches by restarting your WiFi range extender. Wondering about how to restart your Comfast device? Wonder no more!Follow the instructions highlighted below and know how to restart the device in no time:
Step 1: Unplug your WiFi range extender.
Step 2: After that, you need to disconnect your extender from your router.
Step 3: Wait for a few minutes.
Step 4: Plug in back the extender.
Step 5: Reconnect your router and the extender.
Are you still facing the same issue? If yes, then try the next hack in line.
Don’t get hyped! You will fix the issue by yourself from the comfort of your home. Just try applying the fixes provided here.
Fix 2: Make Proper Extender-Router Connection
Are your router and extender properly connected to each other? You need to verify it. Bear in mind, an unstable extender-router connection may also force you experience the red light issue. Need not to worry at all! For getting the issue fixed within minutes, you have to ensure a proper connection between them.
Now, the question arises – how to connect the devices?
Making a connection between your router and the extender is pretty simple. You can take help of an Ethernet cable or also connect them wirelessly.
For Ethernet source, all you have to do – insert one end of the cable into the extender and another end into the router. Make sure that the cable is working and inserted firmly into your devices.
You can also connect the devices wirelessly. For this, you simply have to keep them at a safe distance. And, the safe distance between your devices can be maintained if you have kept them in the same room.
Fix 3: Relocate the Extender
Still unable to fix the issue? Is your answer a big yes? Well, it seems like your extender is placed at a very bad location. Bear in mind, if you have kept the extender inside your show window or closet, then also you might see the red color LED on it. So, you must place it openly.
Also, you can place the Comfast WiFi extenderat the center-most area of your home and ensure to place it on a higher shelf. Doing so will always help the extender to receive continuous WiFi signals from your router.
Need More Help?
Still going mad because of the same issue? Did you nod in yes? No problem! There are a couple of fixes more that you can try for getting the issue fixed. Scroll down a little to know them:
Update the firmware of your Comfast extender. Note this down, an outdated firmware version on the extender may lead to the red light issue. So, without much delay, access the extender’s firmware update page via Comfast extender’s IP address, 192.168.10.1 and follow the instructions to perform the process in a hassle-free manner.
Secondly, improper or partial Comfast setup also leads to the red light issue. For fixing the issue and to make the most out of the device, reset your extender and then configure it again applying the instructions provided in the Comfast WiFi extender manual.
We really hope that after following the fixes provided here you are able to fix the “Comfast WiFi extender red light” issue!
